Monday, August 23, 2010

A spider made me late for work!

Yes really!
It wasn't just some feeble excuse, it was true.

One morning this week we woke up late because the power had gone off in the house, stopping the alarm clock from waking us up. At first we thought it was a power cut. Then I discovered that it was something to do with the pond electrics.

After much faffing around switching off the various pumps, and other devices, and disconnecting the armoured cable at the pond end, then the garage end, I eventually traced the problem back to the short length of mains cable going from the wall plug, to the start of the armoured cable. Eh? How can that be, I thought.

When eventually I opened up the plug I discovered that a spider had crept inside the opening at the bottom of the plug, up into the fuse area, and must have bridged the gap between the Live and the Earth connections, and FIZZLE, BANG!!! One dead, exploded spider!

The trouble was that its mortal remains were still causing a connection across the terminals, that were sufficient to trip the RCD device. Finally I cleaned out the plug and power was restored without tripping the electrics off every time.

How bizarre!

Sunday, June 27, 2010

Oops - My bad

Oh dear. I've only just noticed that when Google updated and moved my blog, I totally forgot to update the new site address in my main site. Sorry! My Pond info web site should now be pointing properly at this blog.

Tuesday, March 16, 2010

This blog has moved


This blog is now located at http://jims-pond-blog.blogspot.com/.
You will be automatically redirected in 30 seconds, or you may click here.

For feed subscribers, please update your feed subscriptions to
http://jims-pond-blog.blogspot.com/feeds/posts/default.

Tuesday, January 06, 2009

Happy New Year

First I'd like to say Happy New Year to all readers of my blog and website.

Next I thought I would add the following email I received from someone the other day about their pond planning:-
This filter stuff is getting confusing- I read Skippy's diy biofilter site. His claims are that his filter never needs cleaning, and that prefilter not necessary. I am told by others that a skimmer is a good prefilter, and that a commercially available biofilter falls unit is adequate. I do like the idea of a trickle tower,along with a traditional biofalls unit. Can your trickle tower or a commercially available one be incorporated either before or after a biofalls filter? How are the connections made? I am more inclined to buy these and connect everything rather than a diy configuration. Thank you Steve p.s I plan to build a 10x11x2-3 ft pond w/5-7 koi/other fish/plants
My reponse:-

Hi Steve,

I can sympathise with you!

Yes I also thought that a filter needs cleaning reasonably regularly. I
once wrote to the Skippy site and asked them the same sort of question,
and they said that a prefilter will help to prevent large amounts of crud
getting into the bio-filter.

That's why I designed my own DIY bio-filter to employ a pre-filter before
going into the main biofilter unit, and even then it has a section at the
bottom which I call the vortex area, where I angled the inlet pipes to
make the water spin around so that crud settles out into the large bottom
drain hole. Look at the photos on my site to see what I mean.

Both the pre-filter mechanism and the vortex section are quite good at
removing larger sediment, then the cleaner water goes into the bio-filter
media (green scrubbies) where the bacteria do their job to break down the
ammonia in the water.

I clean the pre-filter every few days, and drain the bottom section every
week, but the main bio-filter I generally leave alone and only actually
dismantle and clean once a year.

You will see that my bio-filter then exits the water into a homemade
trickle tower, i.e. the water comes out of the top of the bio-filter and
simply trickles down through some lava rock in the green trickle tower.

I would recommend that you get your pond setup and working with some basic
fish and plants to establish a good natural balance before you spend lots
of money on Koi which are generally far more sensitive creatures to
imbalances in the pond, or disease.

Also make sure that whatever filter you use (bought or DIY) is sized
sufficiently to cope with the amount of sewage (ammonia) the fish will
produce. Koi are voracious eaters and therefore produce a lot more
excrement than smaller fish! Small fish ponds with the traditional
goldfish can usually keep up with the natural filtration and biodegrading
of fish poop without the need for water pumps or bio-filtration. But not
so with Koi.

So the filter must be able to cope adequately. Another thing I say to
people is not to skimp on the water pump. I recommend a solids handling
pump that does not clog up with weed easily, otherwise it will lose
pressure and you forever be removing it from the pond to clean it.

If you intend getting Koi, I suggest you do plenty of homework on the
setup of your pond, and talk to your local aquatic supplier for advice, or
frequent some of the online fish pond forums to learn as much as you can
before going for expensive fish. While a DIY setup can be perfectly
adequate for the task, if this is the first time you've owned fish and
setup a pond I think you would be better starting off in a simple way, and
getting used to fish keeping in a pond for a year, before moving onto
larger fish.

Alternatively if you have the money and wish to pay for a professional to
build the pond and equip it, and advise you then of course go that route
and get some nice koi from the start. It depends on you aspirations and
current experience.

Personally this is the route I have taken, with my pond in its current
form for about 5 years now, but my fish keep having babies, and the two
ghost koi I have are now monsters, so I've got to a point where I am
considering upsizing the pond, making it deeper, and re-equipping with
some more pro kit.

However, in all the time I've had the pond the DIY skippy has kept the
pond clear and clean (although blanket weed will tend to be a problem at
times, simply because my pond is not deep enough, so sunlight causes it to
grow too fast).

If you're going for koi, I would try digging deeper than 2-3 feet. They
will need the depth to swim in, and a pond that shallow may have a harder
time with green water in the summer, and may suffer from wide temperature
variations which heightens algae problems, and oxygen deficiency resulting
in the fish gasping for air.

This is why you will often see pro koi ponds with some kind of pagoda
providing shade and cover for the pond, to keep leaves and twigs out, fend
off marauding herons, and keep sunlight out so as to control the
temperature and photsynthesis of phytoplankton (algae) in the pond. If you
over feed the fish, you will end up with too much fish waste, or uneaten
food polluting the pond, and this provides nutrients for the phytoplankton
to feed on resulting in a bloom of these tiny living creatures. When
sunlight falls on them, they photosynthesize and turn from clear
transparent bodies to green, and this is what makes the pond water become
green and unclear, and now suddenly you can see only the plankton (algae)
so preventing you from seeing your fish, and in extreme cases using up all
the oxygen in the water, so suffocating the fish, causing them distress
and even death. Things have to be in pretty bad shape for this to happen,
so don't worry about that too much. The thing to understand is the natural
balance you are trying to achieve.

If you're trying to stuff too many big fish into too small a pond, with
too much sunlight, too much food, and not enough plants to oxygenate the
water to use up the nitrates before the algae can, that's when the trouble
begins! And that's when you need a bio-filter, pumps and venturis to
oxygenate the water and help mother nature keep the balance with good
bacteria to maintain a healthy pond.

There's a few things for you to think about. If you have any more
questions I would be happy to answer them.

Cheers
Jim

Saturday, August 09, 2008

Picture of Damselfly

Here is another nice picture of a Damselfly taken by my friend James Billings.